Connect Nuki Smart Lock to SwitchBot and unlock powerful automations

SwitchBotハブ２のタッチボタンを押すことをトリガー条件として設定することが可能です。例えば：ハブ２の左ボタンを押すと、SwitchBotスマート電球をオンにします。

This trigger fires every time someone locks the door.

This trigger fires when one of the touch buttons of your Hub 2 is pressed. E.g. when the left touch button is pressed, turn on SwitchBot Color Bulb.

This trigger fires every time someone unlocks or unlatches the door.

プラグミニの状態をアクション実行条件として設定できます

This trigger fires every time someone locks the door with Lock 'n' Go by pressing the button on the Smart Lock twice.

水漏れセンサーの水漏れ/水位低下状態をトリガー条件として設定することが可能です。

This trigger fires every time someone unlocks the door with Auto Unlock.

You can choose Plug Mini's behaviour as a trigger condition

This trigger fires every time someone closes the door. (Only supported for activated door sensor.)

このトリガーはロボットの状態が変更した時に実行します

This trigger fires every time someone opens the door. (Only supported for activated door sensor.)

You can use the Water Detector state as a condition to trigger an automation.

This trigger fires every week, if the battery state of the Smart Lock is critical.

温度・湿度の変化を検出された時、SwitchBot温湿度計（メーター）が「THAT」サービスをトリガーにします。例えば、温度が27度より高い時、SwitchBot Hub PlusでエアコンをONにします。

This trigger fires every time the Smart Lock state changes to uncalibrated.

This trigger fires when the status of your SwitchBot Robot Vacuum Cleaner changed

Whenever a preset temperature and/or humidity change detected, SwitchBot Thermometer & Hygrometer (the Meter) will try to trigger the service. E.g. if the temperature is too high, turn on AC with the SwitchBot Hub Plus (the Hub Plus).

動体検知の結果によって、SwitchBot人感センサーがサービスをトリガーします。

When Motion Sensor detected motion or no motion, the SwitchBot motion sensor will try to trigger the service.

開閉状態の検知結果によって、SwitchBot開閉センサーがサービスをトリガーします。

When Contact Sensor detected door/window opened or closed or left open, the SwitchBot contact sensor will try to trigger the service.

このトリガーはロックの状態が変更した時に実行する

This trigger fires when the status of your SwitchBot Lock is changed.

This query returns a list of times the activated door sensor sensed someone opening the door.

This query returns a list of instances when someone locked the door with Lock 'n' Go by pressing the button on the Smart Lock twice.

This query returns a list of events when someone locks the door.

This query returns a list of weekly warnings from when battery state of Smart Lock was critical

This query returns a list of events when someone unlocked the door with Auto Unlock.

This query returns a list of when someone unlocks or unlatches the door.

This query returns a list of when the Smart Lock stated changed to uncalibrated.

このアクションは、SwitchBotスマート気化式加湿器を制御します。

This action will lock the door.

You can set the Vertical Oscillation to turn on or turn off.

This action will unlock the door.

上下の首振りモードを設定できます。

This action will open the door by pulling the latch.

風量を調整できます。

This action will perform a Lock 'n' Go command, which unlocks your door and locks it again after a certain time.

You can set the nightlight status of your Air Circulator Fan.

This action will activate Auto Lock. Auto Lock automatically locks your door a certain time after the last unlock or if it is closed (with door sensor activated).

This Action will control the SwitchBot Evaporative Humidifier.

This action will deactivate Auto Lock.

首振りモードを設定できます。

You can set the fan speed.

You can switch between 4 blowing modes.

You can set the Horizontal Oscillation to turn on or turn off.

This action will open/close Blind Tilt up or down and to a specific percentage.

This action will trigger the specified Bot to turn off the switch.

常夜灯の明るさを調整できます。

ブラインドポールを特定の位置まで開ける/閉めるに設定可能です。

4つの送風モードを切り替えます。

This action will trigger the specified Bot to press the switch.

This action will trigger the specified Bot to turn on the switch.

This action will ask SwitchBot Hub Plus to turn off your paired air conditioner.

This action will ask SwitchBot Hub Plus to turn on or set your paired air conditioner with predefined mode, temperature and fan speed.

This action will ask SwitchBot Hub Plus to turn on your paired appliance with the IR remote feature.

This action will ask SwitchBot Hub Plus to turn off your paired appliance with the IR remote feature.

This action will turn on your Plug.

This action will turn off your Plug.

This action will ask SwitchBot Hub Plus to send an infrared signal to control TV.

This action will ask SwitchBot Hub Plus to send an infrared signal to control any "Others" types of appliances set in the SwitchBot App. Note: Please use other actions if your appliance type is known to the App for a better experience

This Action will control the SwitchBot Smart Fan.

このアクションはSwitchBotスマート扇風機を操作できます。

This Action will control the SwitchBot Smart Humidifier.

このアクションは、SwitchBotスマート加湿器を制御します。

Run the Scene you previously set in the SwitchBot App. Only manual execution types are allowed.

SwitchBot アプリで作成したシーンを実行します。（ご注意：手動実行するシーンのみ）

This Action will control the SwitchBot Curtain.

このアクションは、SwitchBotカーテンを制御します。

You can set the on/off state of your Color Bulb here.

本ページで電球の状態を設定できます

You can set the brightness of your Color Bulb here.

本ページで電球の明るさを設定できます

You can set the color of your Color Bulb here.

本ページで電球のカラーを設定できます

You can set the color temperature of your Color bulb here.

本ページで電球のカラーを設定できます

You can set the presets saved in your SwitchBot app here.

本ページでSwitchBotアプリに保存されたプリセットを設定できます

The robot will start vacuuming

ロボットは清掃を開始します

The robot will pause vacuuming (pause recharging)

ロボットは清掃/再充電を一時停止します

The robot will start recharging

ロボットは充電に帰還します

The robot will switch mode

ロボットは吸引力のモードを切り替えます

シーリングライトのオン/オフを設定できます

You can set your Ceiling Light to be turned on/off.

Toggle Ceiling Light On/Off

トグルシーリングライト（オン/オフ）

You can set the color temperature of your Ceiling Light here.

シーリングライトの色温度を設定できます

シーリングライトの明るさを設定できます

You can set the brightness of your Ceiling Light here.

You can set the on/off state of your Strip Light here.

本ページでテープライトの状態を設定できます

You can set the color of Strip Light on this page.

本ページでテープライトのカラーを設定できます

You can set the Plug Mini's action

You can set the Plug Mini's action

You can set the Plug Mini's action

プラグミニの実行アクションを設定できます

プラグミニの実行アクションを設定できます

プラグミニの実行アクションを設定できます